MHardware fiberglass cowls

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
New Update
Howard Larson - 2x 21 straight, 45 - Paid, dropping at the PO today, PM with tracking
Frank Pulte - 21 straight, 21 wrap - Shipped, PM with tracking
Samuel Hagan - 21 straight - Paid, dropping at the PO today, PM with tracking
 
Mike
I would like to have a 45 cowl and a gas rigger cowl.
PM me total shipped to 93551.

Thx
Alex
 
Mike
I would like to have a 45 cowl and a gas rigger cowl.
PM me total shipped to 93551.

Thx
Alex
OK Alex,
I hope to have them done early next week. Got a bunch of sponsons I am reworking on the glass lay up bench at the moment. Then go racing on Saturday. 40 + 45 plus 14 for shipping. Just to confirm, you would like the MH gas rigger cowl? I also have the eagle one. Let me know.
Mike
 
Hi Mike
Sounds good . I would like to have the MH gas rigger cowl. I'm guessing it will fit a 5" tub. PM me how I can pay you.

Alex
 
Yes it will. All of my cowls have extra flange wide/length. Able to use in lots of different hulls. I will let you when they are ready for payment.
Thanks
Mike
 
Got my gas twin rigger cowl today, great quality, going to try to fit it onto a Ellison twin rigger.
Will keep you posted on the results
Like I said John, if you need any help modifying it. Let me know.
Mike
 
Joel
17.25 oval from end of pipe shroud to the tip of the mold. The motor center is 10.5 from the tip of the mold. I have something in the works that will be longer. But it will be some time before that is available.
Mike
 
Mike
I'll take two eagle 45 cowls,if you don't mind you can leave out the black carbon fiber.

Thanks,
Joel
 
Joel
Yeah I can do that. It will be a bit to get them done. Just to be sure the cowl height is 2 1/8. This is what the size of the abs cowl was when I pulled the mold. The newer style SGX is 1/4 smaller on height. If that is ok with your boat, then I can get going on them. The other mold will be sometime till that is available.
Mike
 
Joel
Yeah I can do that. It will be a bit to get them done. Just to be sure the cowl height is 2 1/8. This is what the size of the abs cowl was when I pulled the mold. The newer style SGX is 1/4 smaller on height. If that is ok with your boat, then I can get going on them. The other mold will be sometime till that is available.
Mike
I'll wait for the newer style 45 mold. Thanks for the information Mike.

Joel
 
Joey,
Your G30 cowl is in the mold. Payment details sent in PM.

Joel, Tim
Started work on the new mold. Stay tuned for updates on the 45 cowl.

Jon,
I will get the mold out and get it ready for lay up.
Mike
 
Back
Top