International Waters Community

International Waters Gallery


0263.jpg
M5-Mix arm.996 viewsRounding the corners on the rotary table. Terry Keeley
10.jpg
b2-Rough castings.775 viewsHow they looked after curing.Terry Keeley
100-0096_IMG.JPG
f8-Weight.866 viewsUsed some aluminum sheets to hold the skin under the nose, put lots of weight on top to hold the rest.Terry Keeley
100-0098_IMG.JPG
f9-Trimming.960 viewsTrimmed the outside with a laminate bit. Masking tape prevents cutting too close.Terry Keeley
100-0100_IMG.JPG
g1-Roughing.755 viewsMarked out the areas to cut and used the dremel with a burr.Terry Keeley
101-0105_IMG.JPG
g2-Trimming.890 viewsWanted a 1/4" lip so I taped a wood spacer all around.Terry Keeley
101-0107_IMG.JPG
g3-Light?803 viewsAbout 9oz. so far.Terry Keeley
101-0108_IMG.JPG
g4-What's next?1106 viewsTerry Keeley
101-0110_IMG.JPG
g5-Engineering vs...865 viewsThe boys in the field wanted to use xx phenloic cause it won't absorb oil and looks kinda cool, engineering wanted maple cause it's half the weight, engineering won this one :)Terry Keeley
101-0112_IMG.JPG
g6-Boom block.867 viewsStarted with hunk of maple.Terry Keeley
151 files on 16 page(s) 1