International Waters Community

International Waters Gallery

Click to view full size image

10) Razor Blade Angle

Time to seal the boat. I use Z Poxy finishing resin. Apply with a brush and squeegee excess with something like a playing card. The card can also be used to squeegee an epoxy puddle. After the squeegee, wipe with a paper towel or foam brush. I prefer the foam brush. Once cured, use a razor blade with a scraping or dragging action to level and smooth the finished surface. The blade should be held at an angle and pulled away from your thumb. After this sand lightly with 220 grit paper and repeat the process.

Rudder pushrod.jpg Sanding stick.jpg Scrape 1.jpg Scrape 2.jpg servo mounts.jpg
Rate this file (No vote yet)