International Waters Community

International Waters Gallery

Click to view full size image

Rudder is trimmed off about an inch, bottom of rudder is 4 inches below transom bottom. Strut is set about 7/8 to 1 inch deep bottom of hull to table. Flat or just about 1/16th up at the front of the strut should be a good setting. 1/2 inch hole for pipe exit drilled thru poy transom doubler.

DSC00567.JPG DSC00568.JPG DSC00569.JPG DSC00570.JPG DSC00571.JPG
Rate this file (No vote yet)