International Waters Community

International Waters Gallery

Click to view full size image

D2 - adding support lip for cockpit liner

Using a piece of cardboard tightly wrapped in wax paper I begin adding strips of 2oz. cloth to form the supporting lip on each side & the front to secure the cockpit liner. The cardboard is is the same size & thickness as the 3/32" birch ply base I just cut which will get the Phil Thomas driver figure epoxied to it then custom cut & shaped for the MAC carb to have plenty of room to breathe.

MVC-001S~0.JPG MVC-002S~0.JPG MVC-002S~1.JPG MVC-003S~1.JPG MVC-003S~2.JPG
Rate this file (No vote yet)