International Waters Community

International Waters Gallery

Click to view full size image

Completed pieces are all interchangeable & after mounting to the flywheel are within +-.0002 concentricity 1.000 in from the split collets face. The same type of a flanged piece with six mounting holes is made when I set up ball and pin universals for solid shaft applications. When using the solid shaft method the thrust is driven up the entire shaft into the engine by using hardened thrust washers between the ball ends & there sloted ends.

cable_collet_clamps_058.jpg cable_collet_clamps_057.jpg cable_collet_clamps_056.jpg cable_collet_clamps_055.jpg cable_collet_clamps_054.jpg
Rate this file (Current rating : 0 / 5 with 2 votes)