International Waters Community

International Waters Gallery


IMG_1075.jpg
B1 Slots for Vertical Mounts324 viewskcvnd
IMG_1076.jpg
B2 Vertical Mounting Bracket318 viewskcvnd
IMG_1077.jpg
B3 Bracket in Slot297 viewsThe bracket will be epoxied to the bottom of the hullkcvnd
IMG_1081.jpg
B4 Wing Mount340 viewsThis piece will be epoxied in with Cabosil and the wing will bolt through it.kcvnd
IMG_1083.jpg
B8 Rear Sponson344 viewsNeeds needs some minor filling and sandingkcvnd
IMG_1084.jpg
B6 Adding detail321 viewsAdding some detail to rear sponson to pattern the U-10 (see nest pic). I used some birch ply epoxied in placed and then some West Systems 410 Fairing filler. WIng is placed for fitment and will need to be moved rearward. kcvnd
IMG_1153.jpg
B9 Right Rear Sponson312 viewsWill need to add some detail here to match real boatkcvnd
IMG_1158~2.jpg
B5 Finished wing mount290 viewsMount was epoxied to deck with West Systems 406 filler
and the wing mount spar was sanded flush
kcvnd
IMG_1160.jpg
C1 Right Rear315 viewsAttempting to match angle to real boat with some plywood and filler.kcvnd
IMG_1189.jpg
E1 Motor Mounted364 viewsI got bored and wanted to mount up the motor. Joe made cutouts for under the deck access. These will be cleaned up with a dremel later on..kcvnd
33 files on 4 page(s) 2