International Waters Community

International Waters Gallery

Click to view full size image

Crankcase boring fixture

The four locating pins, located on the top of the fixture on the right, engage the four crankcase mounting holes with a tight fit. Then the block of metal, which has mounting lugs already machined, is clamped for all machining operations. While in this fixture; the cylinder bore & face; the front end bore & face; the back end face; the 8-32 threaded holes for the front & back end; the 8-32 threaded holes for the head; the exhaust outlet; the 8-32 threaded holes for the exhaust header; profiling of the crankcase outside & the cutting of the transfers is done, completing the crankcase. The fixture is located with two 3/8 inch dowel pins, located on the left, when used in either position for boring.

connecting rod 029.jpg connecting rod 032.jpg crankcase, crankshaft, & piston fixtures 001.jpg crankcase, crankshaft, & piston fixtures 002.jpg crankcase, crankshaft, & piston fixtures 003.jpg
Rate this file (Current rating : 5 / 5 with 1 votes)