International Waters Community

International Waters Gallery

Click to view full size image

rear view of dyno housing

The long knurled knob is the load control valve. It is pre-set before the beginning of the dyno pull. The two smaller black knobs control incomming water to the engine & incomming water to the dyno reservoir. Incomming water to the engine is metered at the outlet to control engine temperature. Incomming water to the dyno reservoir is adjusted to maintain a completely full reservoir during dyno pulls. This ensures that there is no change in the pre-set load amount due to a change in the water height in the reservoir.

dynamometer 001.jpg dynamometer 002.jpg dynamometer 004.jpg dynamometer 005.jpg dynamometer 006.jpg
Rate this file (Current rating : 4.5 / 5 with 2 votes)